The box says 10 mg. The pen says 10 mg. But inside that one pen are four full doses, a month of Zepbound, and no needle.
That last part is the first surprise. Unlike the single-use pens that come ready to inject, the KwikPen requires you to screw on your own needle every time, prime the device before your first dose, and if you are splitting doses, count clicks while you twist the dial.
The second surprise is what one click means. Every click is one sixtieth of the dose printed on the pen. A full 10 mg dose is 60 clicks. A 2.5 mg partial dose from that same pen is 15 clicks. Get the math wrong and you are either wasting medicine or taking more than you planned.
1. Four doses, one pen, your own needle
The KwikPen is a multi-dose device. You get four weekly injections in one pen, not four separate pens.
The dose printed on the box and the pen, whether it is 2.5 mg, 5 mg, 7.5 mg, 10 mg, 12.5 mg or 15 mg, is the amount you get per injection if you dial it all the way up.
The pen does not come with needles. You buy them separately. The creator uses single-use needles from Amazon, the same type used for insulin pens, and links them in the video description.
Each needle is used once, then disposed of in a sharps container. You screw on a new one for each injection.
Unlike the single-use pens that have one dose per pen, this has all four doses in one pen.On The Pen™ GLP-1 News
2. Set up and prime before your first dose
When you first open the pen, remove the cap. You will see an orange ball inside and the medicine with a plunger visible through the clear window.
Wash your hands, then wipe the inside of the pen with an alcohol wipe, especially around the orange ball where the needle will attach.
Screw the needle on. There are two caps on the needle. Remove both to expose the tip.
Now prime the pen. Turn the dial until you hear two clicks and see the line. Push the button. Medicine should come out of the needle tip. Your pen is now primed and ready to dial your dose.
You only prime once, the first time you use a new pen. You do not need to prime before every injection.
Why this matters if you haven’t started yet: Priming gets rid of air in the pen and confirms the needle is attached correctly. Skip this step and your first dose may not be accurate.
3. The click math: 60 clicks for a full dose, less for partial
Each click on the pen is one sixtieth of the dose printed on the label. A full dose, no matter what strength pen you have, is always 60 clicks.
If you are taking the full dose printed on your pen, twist the dial all the way until it stops clicking and the number 1 appears in the window. That is your full dose.
If you are splitting doses, you need to count. The creator takes 2.5 mg from a 10 mg pen, which is 15 clicks. He uses a chart available at otplinks.com that shows how many clicks correspond to each partial dose for each pen strength.
If you twist too far, you can turn it back without pushing the button. Pushing the button expels medicine through the needle, so only do that when you are ready to inject.
Every time you click this, it's one sixtieth of the dose printed on the pen.On The Pen™ GLP-1 News
4. Inject, check the window, then cap and store
Wipe your injection site with an alcohol wipe. Press the needle into your skin and push the plunger all the way down.
The plunger should return to zero quickly. Check the window to confirm. If it is not at zero, reinsert the needle and push again until it reaches zero.
You may see a small amount of medicine on the needle tip after you pull it out. That is normal. You still got your full dose.
Replace the outer cap on the needle. The creator suggests doing this on a flat surface to avoid accidentally poking yourself. Once capped, unscrew the needle and dispose of it in a sharps container.
Your pen is now ready to store and use again next week.
5. What the pen does not tell you
The KwikPen does not have dose markers for anything other than the full printed dose. If you are microdosing or splitting, you are counting clicks, not reading a dial.
There is no way to see how many doses are left in the pen just by looking at it. You have to track your injections separately.
The pen does not click or stop you from dialing past a full dose if there is not enough medicine left for another full injection. If you are on your fourth dose and try to dial up a fifth, the pen may let you turn the dial but will not deliver a full dose.
Store the pen in the refrigerator between doses, just like the single-use pens. Do not freeze it.
Why this matters if you haven’t started yet: If you lose track of how many doses you have taken, you risk running out mid-month or wasting medicine by trying to dial a dose that is not there.
The KwikPen is not more complicated than the single-use version. It just asks you to do three things the old pens did for you: attach the needle, count the clicks if you are splitting, and track how many doses you have left.
If you are taking the full printed dose every week, it is 60 clicks, one injection, four weeks, done. If you are splitting, print the chart or memorize the math before you twist. Either way, the plunger goes to zero or it does not. That part has not changed.
Questions people ask
How many doses are in a Zepbound KwikPen?
Each KwikPen contains four doses, enough for four weekly injections. The dose strength printed on the pen and box is the amount you get per injection if you dial the full 60 clicks.
Do I need to buy needles separately for the Zepbound KwikPen?
Yes. The KwikPen does not come with needles. You need to purchase single-use pen needles separately, the same type used for insulin pens, and attach a new one before each injection.
How do I take a partial dose with the Zepbound KwikPen?
Each click on the pen is one sixtieth of the printed dose. To take a partial dose, count the clicks as you twist the dial. For example, 15 clicks from a 10 mg pen gives you 2.5 mg. Use a dosing chart or calculate the clicks before you inject.
On The Pen is an obesity medicine news platform that covers GLP-1 medications and provides practical dosing and usage guidance for people using tirzepatide and semaglutide. 48,178 views on the original video.
Watch the original on YouTube →